TuneWorks

Measured conclusion: Deep-tested. L2 outcome: tools_ok.

Motorsports workspace for vehicles, setups, sessions, logs, maintenance, and race engineering.

Add to your agent

Copy this into your MCP client config:

{
  "mcpServers": {
    "TuneWorks": {
      "url": "https://tuneworks.ai/mcp",
      "transport": "streamable-http"
    }
  }
}

Measured tools (100)

• calculate_race_fuel_and_weight read-only

  Plan a race fuel load, reserve, start weight, and projected minimum-weight margin. Calculates from measured inputs without authentication and does not read or save account data. Assumes the entered per-lap consumption applies to race, formation, and allowance laps. Finish weight retains only the selected reserve. Confirm your series weighing rules and validate consumption with real data.

  Parameters:

  • consumption (required) — number — Fuel consumption per lap (gal in US; L in metric)
  • formationLaps (required) — number — Formation / warm-up laps (laps)
  • extraLaps (required) — number — Extra-lap allowance (laps)
  • reserve (required) — number — Fuel reserve (%)
  • baseWeight (required) — number — Car + driver without fuel (lb in US; kg in metric)
  • minimumWeight (required) — number — Class minimum weight (lb in US; kg in metric)
  • ballast (required) — number — Ballast fitted (lb in US; kg in metric)
  • raceMode (required) — string — Race format
  • fuel (required) — string — Fuel type
  • unitSystem (required) — string — Units for all inputs and results, as specified on each field.
  • lapTime — number — Expected lap time (sec)
  • duration — number — Race duration (min)
  • raceLaps — number — Scheduled race laps (laps)
  • customDensity — number — Custom fuel density (lb/gal in US; kg/L in metric)

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• calculate_gear_ratio_speed read-only

  Check speed, RPM, and shift drop from tire size, final drive, and gear ratio. Calculates from measured inputs without authentication and does not read or save account data. Use measured tire diameter when possible. Tire growth and converter/clutch slip can move real-world numbers.

  Parameters:

  • rpm (required) — number — Engine RPM (rpm)
  • speed (required) — number — Vehicle speed (mph in imperial; km/h in metric)
  • gear (required) — number — Gear ratio
  • finalDrive (required) — number — Final drive
  • tireDiameter (required) — number — Tire diameter (in in imperial; mm in metric)
  • nextGear (required) — number — Next gear ratio
  • mode (required) — string — Primary answer
  • unitSystem (required) — string — Units for all inputs and results, as specified on each field.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• calculate_tire_pressure_adjustment read-only

  Turn cold, hot, and target hot pressures into the next cold pressure to try. Calculates from measured inputs without authentication and does not read or save account data. This gives a next-test pressure, not a universal ideal. Recheck after the next run.

  Parameters:

  • cold (required) — number — Starting cold pressure (psi in imperial; bar in metric)
  • hot (required) — number — Measured hot pressure (psi in imperial; bar in metric)
  • target (required) — number — Target hot pressure (psi in imperial; bar in metric)
  • ambientChange (required) — number — Expected ambient temp change (F in imperial; C in metric)
  • unitSystem (required) — string — Units for all inputs and results, as specified on each field.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• calculate_corner_balance read-only

  Calculate cross weight, left/right balance, and front/rear split from four scale pads. Calculates from measured inputs without authentication and does not read or save account data. Measure the car in the same state you drive it: driver, fuel, ballast, and tire pressures matter.

  Parameters:

  • lf (required) — number — Left front (lb in imperial; kg in metric)
  • rf (required) — number — Right front (lb in imperial; kg in metric)
  • lr (required) — number — Left rear (lb in imperial; kg in metric)
  • rr (required) — number — Right rear (lb in imperial; kg in metric)
  • unitSystem (required) — string — Units for all inputs and results, as specified on each field.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• calculate_spring_wheel_rate read-only

  Convert spring rate and motion ratio into wheel rate for setup comparisons. Calculates from measured inputs without authentication and does not read or save account data. Wheel rate compares spring changes. It does not account for bars, bump stops, tires, or aero load.

  Parameters:

  • springRate (required) — number — Spring rate (lb/in in imperial; N/mm in metric)
  • motionRatio (required) — number — Motion ratio
  • springAngle (required) — number — Spring angle from vertical (deg)
  • cornerWeight (required) — number — Corner weight (lb in imperial; kg in metric)
  • unitSystem (required) — string — Units for all inputs and results, as specified on each field.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• calculate_fuel_injector_size read-only

  Estimate injector size from horsepower, fuel type, injector count, and duty cycle. Calculates from measured inputs without authentication and does not read or save account data. This is a sizing estimate. Confirm with your tuner and fuel pressure data.

  Parameters:

  • hp (required) — number — Horsepower target (hp)
  • injectors (required) — integer — Injector count
  • duty (required) — number — Target duty cycle (%)
  • current (required) — number — Current injector size (cc/min)
  • fuel (required) — string — Fuel type

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• convert_afr_lambda read-only

  Convert AFR and lambda across gasoline, E85, methanol, and race fuel scales. Calculates from measured inputs without authentication and does not read or save account data. Use this as a conversion reference. Tune targets depend on fuel, engine, load, and calibration strategy.

  Parameters:

  • afr (required) — number — AFR
  • lambda (required) — number — Lambda
  • fuel (required) — string — Fuel scale

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• calculate_brake_bias read-only

  Estimate front brake bias from piston area, rotor size, and pad friction. Calculates from measured inputs without authentication and does not read or save account data. This estimates mechanical bias. Tire grip, weight transfer, ABS, and balance bars still matter.

  Parameters:

  • frontPiston (required) — number — Front total piston area (in2 in imperial; cm2 in metric)
  • rearPiston (required) — number — Rear total piston area (in2 in imperial; cm2 in metric)
  • frontRotor (required) — number — Front effective radius (in in imperial; mm in metric)
  • rearRotor (required) — number — Rear effective radius (in in imperial; mm in metric)
  • frontMu (required) — number — Front pad friction
  • rearMu (required) — number — Rear pad friction
  • unitSystem (required) — string — Units for all inputs and results, as specified on each field.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• compare_tire_sizes read-only

  Compare tire diameter, circumference, ride height, and speedometer change. Calculates from measured inputs without authentication and does not read or save account data. Actual mounted diameter changes by tire model and pressure. Use manufacturer specs when available.

  Parameters:

  • oldWidth (required) — number — Current width (mm)
  • oldAspect (required) — number — Current aspect ratio (%)
  • oldWheel (required) — number — Current wheel diameter (in in imperial; mm in metric)
  • newWidth (required) — number — New width (mm)
  • newAspect (required) — number — New aspect ratio (%)
  • newWheel (required) — number — New wheel diameter (in in imperial; mm in metric)
  • unitSystem (required) — string — Units for all inputs and results, as specified on each field.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• check_race_alignment read-only

  Check camber and total toe against broad autocross and track baseline ranges. Calculates from measured inputs without authentication and does not read or save account data. This is a baseline checker, not a vehicle-specific prescription. Tire wear and driver feedback decide the next step.

  Parameters:

  • frontCamber (required) — number — Front camber (deg)
  • rearCamber (required) — number — Rear camber (deg)
  • frontToe (required) — number — Front total toe (in in imperial; mm in metric)
  • rearToe (required) — number — Rear total toe (in in imperial; mm in metric)
  • use (required) — string — Use case
  • unitSystem (required) — string — Units for all inputs and results, as specified on each field.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• calculate_lap_time_delta read-only

  Compare two laps or sector sets and see the best theoretical lap. Calculates from measured inputs without authentication and does not read or save account data. Use sectors from timing, video, or data logs. Compare similar conditions before blaming setup.

  Parameters:

  • baselineS1 (required) — number — Baseline sector 1 (sec)
  • baselineS2 (required) — number — Baseline sector 2 (sec)
  • baselineS3 (required) — number — Baseline sector 3 (sec)
  • newS1 (required) — number — New sector 1 (sec)
  • newS2 (required) — number — New sector 2 (sec)
  • newS3 (required) — number — New sector 3 (sec)

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• calculate_ethanol_blend read-only

  Calculates an ethanol blend for a fresh tank, existing fuel, correction, or ratio without authentication or account-data access. Percentages are 0–100 and all volumes use the selected unit. Source ethanol contents are measured values. Fresh mode requires finalVolume; existing mode requires finalVolume, currentVolume, and currentEthanol; correction mode requires tankCapacity, currentVolume, and currentEthanol; ratio mode requires no volumes.

  Parameters:

  • mode (required) — string
  • volumeUnit (required) — string
  • targetEthanol (required) — number — Ethanol percentage (0–100).
  • highFuelEthanol (required) — number — Ethanol percentage (0–100).
  • pumpGasEthanol (required) — number — Ethanol percentage (0–100).
  • finalVolume — number — Volume in volumeUnit.
  • tankCapacity — number — Volume in volumeUnit.
  • currentVolume — number — Volume in volumeUnit.
  • currentEthanol — number — Ethanol percentage (0–100).

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• diagnose_handling_issue read-only

  Provides understeer/oversteer setup guidance without authentication or access to TuneWorks account data.

  Parameters:

  • balance (required) — string
  • phase (required) — string
  • notes — string — Optional driver feedback or setup context.
  • speed — string — Optional speed range or driver note.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• analyze_tire_temperatures read-only

  Interprets inside, middle, and outside tire temperature readings without authentication or access to TuneWorks account data.

  Parameters:

  • readings (required) — object — Tire readings keyed by lf/rf/lr/rr, each with inside, middle, and outside numbers.
  • unit — string
  • targetTemp — number
  • tempWindow — number
  • rearCamberSpread — number
  • frontCamberSpread — number

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• recommend_autocross_damper_adjustment read-only

  Provides a bounded shock/damper adjustment recommendation without authentication or access to TuneWorks account data.

  Parameters:

  • phase (required) — string
  • symptom (required) — string
  • axle — string
  • severity — number

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• find_autocross_sites read-only

  Search the public TuneWorks Autocross Site Finder by coordinates and minimum paved-area dimensions. This may take several minutes because it queries live map and imagery providers.

  Parameters:

  • latitude (required) — number
  • longitude (required) — number
  • radiusMiles (required) — number
  • minimumWidthMeters (required) — number
  • minimumLengthMeters (required) — number
  • minimumReviewScore — number

  Hints: read-only yes · destructive no · idempotent not declared · open-world yes

• get_tuneworks_app_capabilities read-only

  Describes TuneWorks free public capabilities and connected garage capabilities for vehicles, setups, sessions, maintenance, shop lists, Share Build, and log history.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• create_vehicle

  Adds a vehicle to the connected user’s TuneWorks garage so setup, session, modification, maintenance, and optimization context can be attached. Deletes are not supported.

  Parameters:

  • make (required) — string
  • model (required) — string
  • year (required) — number
  • purpose (required) — string — TuneWorks vehicle purpose; Track day / HPDE represents a general track car.
  • displacement (required) — string
  • engineType (required) — string
  • aspiration (required) — string
  • cylindersOrRotors (required) — string
  • fuel (required) — string
  • fuelRating (required) — string
  • vin — string
  • owner — string — Vehicle owner. Defaults to the connected TuneWorks user when omitted.
  • mileage — string
  • subModel — string
  • engineHours — string
  • engineModel — string
  • modifications — string
  • transmissionType — string
  • transmissionSpeeds — string

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• update_vehicle destructive

  Edits an existing vehicle in the connected user’s TuneWorks garage. Deletes are not supported.

  Parameters:

  • vehicleId (required) — string
  • vin — string
  • fuel — string
  • make — string
  • year — number
  • model — string
  • owner — string
  • mileage — string
  • purpose — string
  • subModel — string
  • aspiration — string
  • engineType — string
  • fuelRating — string
  • engineHours — string
  • engineModel — string
  • displacement — string
  • modifications — string
  • transmissionType — string
  • cylindersOrRotors — string
  • expectedUpdatedAt — string — Optional optimistic-concurrency timestamp from a previous TuneWorks response.
  • transmissionSpeeds — string

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• list_vehicle_modifications read-only

  List bounded structured modifications for an accessible TuneWorks vehicle.

  Parameters:

  • vehicleId (required) — string
  • limit — number

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• get_vehicle_modification read-only

  Read one structured modification from an accessible TuneWorks vehicle.

  Parameters:

  • vehicleId (required) — string
  • modificationId (required) — string

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• create_vehicle_modification

  Create a structured modification on an editable TuneWorks vehicle.

  Parameters:

  • vehicleId (required) — string
  • category (required) — string
  • system (required) — string
  • status (required) — string
  • brand (required) — string
  • partName (required) — string
  • cost — number
  • notes — string
  • purpose — string
  • quantity — number
  • laborCost — number
  • removedAt — string
  • partNumber — string
  • installHours — string
  • dateInstalled — string
  • datePurchased — string
  • purchasedFrom — string
  • replacedModId — string
  • installMileage — string
  • installedByName — string

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• update_vehicle_modification destructive

  Update a structured modification on an editable TuneWorks vehicle.

  Parameters:

  • vehicleId (required) — string
  • modificationId (required) — string
  • cost — number
  • brand — string
  • notes — string
  • status — string
  • system — string
  • purpose — string
  • category — string
  • partName — string
  • quantity — number
  • laborCost — number
  • removedAt — string
  • partNumber — string
  • installHours — string
  • dateInstalled — string
  • datePurchased — string
  • purchasedFrom — string
  • replacedModId — string
  • installMileage — string
  • installedByName — string

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• archive_vehicle_modification destructive

  Mark a modification canceled so it remains in vehicle history. Requires explicit confirmation.

  Parameters:

  • vehicleId (required) — string
  • modificationId (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• delete_vehicle_modification destructive

  Permanently delete a vehicle modification and its files. Requires explicit confirmation.

  Parameters:

  • vehicleId (required) — string
  • modificationId (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• get_garage_summary read-only

  Returns the connected garage, its activation stage, missing baseline data, and the next available actions toward vehicle optimization.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• list_vehicles read-only

  Lists vehicles saved in the connected user’s TuneWorks app garage and reports the next activation action when the garage is empty.

  Parameters:

  • limit — number

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• get_vehicle_context read-only

  Returns one saved TuneWorks vehicle with modifications, setups, sessions, maintenance, lists, log metadata, optimization readiness, and next actions.

  Parameters:

  • vehicleId (required) — string — Stable TuneWorks vehicle ID from an authorized TuneWorks response.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• list_logs read-only

  List bounded metadata for logs attached to one connected TuneWorks vehicle. Raw log samples are not returned.

  Parameters:

  • vehicleId (required) — string
  • limit — number

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• get_log_context read-only

  Read bounded metadata, channel schema summary, and saved focus window for one accessible TuneWorks log. Raw log samples are not returned.

  Parameters:

  • logId (required) — string

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• list_ai_log_tuner_transcripts read-only

  List recent AI Log Tuner conversations owned by the connected TuneWorks user. Returns conversation metadata without message contents.

  Parameters:

  • limit — number

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• get_ai_log_tuner_transcript read-only

  Read the ordered messages and saved analysis summaries for one AI Log Tuner conversation owned by the connected TuneWorks user.

  Parameters:

  • logId (required) — string — Stable TuneWorks log ID for the requested conversation.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• list_ai_race_engineer_transcripts read-only

  List recent AI Race Engineer conversations owned by the connected TuneWorks user. May be filtered to one vehicle.

  Parameters:

  • limit — number
  • vehicleId — string

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• get_ai_race_engineer_transcript read-only

  Read one AI Race Engineer conversation and its ordered messages. Internal execution debug traces are not returned.

  Parameters:

  • chatId (required) — string — Stable TuneWorks Race Engineer conversation ID.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• archive_vehicle destructive

  Archive a connected user vehicle using TuneWorks soft-delete behavior. Requires explicit user confirmation and never hard-deletes data.

  Parameters:

  • vehicleId (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• list_setups read-only

  Lists chassis setups and setup history saved in the connected TuneWorks account.

  Parameters:

  • limit — number
  • vehicleId — string — Optional TuneWorks vehicle ID to filter setups.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• create_setup

  Saves a new TuneWorks setup for a vehicle. Deletes are not supported.

  Parameters:

  • vehicleId (required) — string
  • setupName (required) — string
  • setupDate (required) — string — Setup date in YYYY-MM-DD format. Natural date strings are accepted but YYYY-MM-DD is preferred.
  • setupData — object — Setup fields such as setup goals, overall weight/balance, tire summary, front/rear ride height, front/rear total toe, per-corner tires, pressures, alignment, ride height, springs, dampers, corner weights, brake/balance, aero, electronics, and notes.
  • dataLogIds — array
  • performedBy — string — Person who performed the setup. If omitted, TuneWorks uses the connected user name/email.
  • influencedSessionId — string

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• update_setup destructive

  Edits an existing TuneWorks setup revision. Deletes are not supported.

  Parameters:

  • setupId (required) — string
  • revision — number — Optional setup revision number. If omitted, TuneWorks updates the latest revision.
  • setupData — object — Partial setup fields to change, including setup goals, overall weight/balance, tire summary, front/rear ride height, front/rear total toe, per-corner tires, alignment, ride height, springs, dampers, corner weights, brake/balance, aero, electronics, and notes. Numeric and boolean values are accepted and saved as setup text values.
  • setupDate — string — Setup date in YYYY-MM-DD format. Natural date strings are accepted but YYYY-MM-DD is preferred.
  • setupName — string
  • vehicleId — string
  • dataLogIds — array
  • performedBy — string — Person who performed the setup. If omitted, TuneWorks uses the connected user name/email.
  • expectedUpdatedAt — string — Optional optimistic-concurrency timestamp from a previous TuneWorks response.
  • influencedSessionId — string

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• archive_setup destructive

  Archive all active revisions of a connected user setup. Requires explicit user confirmation and never hard-deletes data.

  Parameters:

  • setupId (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• list_sessions read-only

  Lists driving sessions, events, track days, autocross runs, and session notes saved in TuneWorks.

  Parameters:

  • limit — number
  • vehicleId — string — Optional TuneWorks vehicle ID to filter sessions.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• create_session

  Saves a new TuneWorks driving session. Deletes are not supported.

  Parameters:

  • vehicleId (required) — string
  • sessionDate (required) — string — Session date in YYYY-MM-DD format. Natural date strings are accepted but YYYY-MM-DD is preferred.
  • sessionFormat (required) — string
  • track — string
  • worked — string
  • braking — string
  • drivers — string
  • setupId — string
  • bestTime — string
  • location — string
  • traction — string
  • eventName — string
  • eventType — string
  • midCorner — string
  • cornerExit — string
  • dataLogIds — array
  • didNotWork — string
  • cornerEntry — string
  • overallBalance — string
  • performanceFigures — string
  • suggestedSetupChange — string
  • additionalSessionDetails — string

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• update_session destructive

  Edits an existing TuneWorks driving session. Deletes are not supported.

  Parameters:

  • sessionId (required) — string
  • track — string
  • worked — string
  • braking — string
  • drivers — string
  • setupId — string
  • bestTime — string
  • location — string
  • traction — string
  • eventName — string
  • eventType — string
  • midCorner — string
  • vehicleId — string
  • cornerExit — string
  • dataLogIds — array
  • didNotWork — string
  • cornerEntry — string
  • sessionDate — string — Session date in YYYY-MM-DD format. Natural date strings are accepted but YYYY-MM-DD is preferred.
  • sessionFormat — string
  • overallBalance — string
  • expectedUpdatedAt — string — Optional optimistic-concurrency timestamp from a previous TuneWorks response.
  • performanceFigures — string
  • suggestedSetupChange — string
  • additionalSessionDetails — string

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• copy_session

  Create an additive copy of an accessible TuneWorks driving session.

  Parameters:

  • sessionId (required) — string

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• archive_session destructive

  Archive a connected user driving session. Requires explicit user confirmation and never hard-deletes data.

  Parameters:

  • sessionId (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• list_maintenance read-only

  Lists service reminders, maintenance history, due work, and completed maintenance saved in TuneWorks.

  Parameters:

  • limit — number
  • vehicleId — string — Optional TuneWorks vehicle ID to filter maintenance.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• create_maintenance

  Creates a TuneWorks maintenance reminder or service item. Deletes are not supported.

  Parameters:

  • vehicleId (required) — string
  • name (required) — string
  • category (required) — string
  • doneDate (required) — string — Required service completion date in YYYY-MM-DD format. Natural date strings are accepted but YYYY-MM-DD is preferred.
  • notes — string
  • dueDate — string — Optional reminder date in YYYY-MM-DD format. Omit when no reminder is wanted.
  • intervalType — string
  • intervalValue — number
  • reminderDaysBefore — number

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• update_maintenance destructive

  Edits a TuneWorks maintenance reminder or service item. Deletes are not supported.

  Parameters:

  • vehicleId (required) — string
  • trackerId (required) — string
  • name — string
  • notes — string
  • dueDate — string — Optional reminder date in YYYY-MM-DD format. Omit when no reminder is wanted.
  • category — string
  • doneDate — string — Service completion date in YYYY-MM-DD format. Natural date strings are accepted but YYYY-MM-DD is preferred.
  • intervalType — string
  • intervalValue — number
  • reminderDaysBefore — number

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• archive_maintenance destructive

  Archive a connected user maintenance item. Requires explicit user confirmation and never hard-deletes data.

  Parameters:

  • vehicleId (required) — string
  • trackerId (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• list_shop_lists read-only

  Lists reusable shop lists, event prep lists, task lists, and parts lists saved in TuneWorks.

  Parameters:

  • limit — number
  • purpose — string — Optional enabled Shop List Purpose value to filter by.
  • vehicleId — string — Optional TuneWorks vehicle ID to filter shop lists.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• get_shop_list read-only

  Read one connected user shop list with its categories and items.

  Parameters:

  • listId (required) — string

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• list_shop_list_items read-only

  Lists individual items and completion status in one connected user shop list, with optional filtering for open or completed items.

  Parameters:

  • listId (required) — string
  • status — string — Optional item-status filter; open represents remaining or not-done items.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• create_shop_list

  Creates a TuneWorks shop list, task list, or parts list, optionally including categories and items.

  Parameters:

  • title (required) — string
  • purpose (required) — string — Required enabled Shop List Purpose value.
  • note — string
  • items — array
  • status — string
  • setupId — string
  • sessionId — string
  • vehicleId — string
  • categories — array

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• update_shop_list destructive

  Edits shop-list metadata or replaces the full categories and items collection.

  Parameters:

  • listId (required) — string
  • note — string
  • items — array
  • title — string
  • status — string
  • purpose — string — Enabled Shop List Purpose value.
  • setupId — string
  • sessionId — string
  • vehicleId — string
  • categories — array

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• add_shop_list_category

  Atomically add one category to an existing editable shop list without replacing its existing categories or items.

  Parameters:

  • listId (required) — string
  • name (required) — string
  • sortOrder — integer

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• add_shop_list_item

  Atomically add one item to an existing editable shop list without replacing existing items. If its category does not exist yet, TuneWorks creates it.

  Parameters:

  • listId (required) — string
  • label (required) — string
  • status — string
  • section — string — Optional category name.
  • quantity — integer
  • sortOrder — integer

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• copy_shop_list

  Create an editable copy of a connected user shop list with all item checks reset.

  Parameters:

  • listId (required) — string

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• reset_shop_list_items destructive

  Reset every item in a connected user shop list to unchecked/open.

  Parameters:

  • listId (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• update_shop_list_item destructive

  Atomically check or uncheck one shop-list item, change its quantity, or do both.

  Parameters:

  • listId (required) — string
  • itemId (required) — string
  • status — string
  • quantity — integer

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• archive_shop_list destructive

  Archive a connected user shop list so it no longer appears in active lists. Requires explicit user confirmation.

  Parameters:

  • listId (required) — string
  • confirmed (required) — boolean — True indicates that the user explicitly confirmed archiving this list.

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• delete_shop_list destructive

  Delete a connected user shop list from active use by safely archiving it. Requires explicit user confirmation and does not hard-delete history.

  Parameters:

  • listId (required) — string
  • confirmed (required) — boolean — True indicates that the user explicitly confirmed deleting this list.

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• get_share_build_options read-only

  Lists existing TuneWorks vehicles, setups, and sessions available for Share Build.

  Parameters:

  • vehicleId — string — Optional TuneWorks vehicle ID to narrow Share Build setup and session options.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• preview_share_build read-only

  Summarizes selected Share Build vehicle, setups, sessions, recipients, and message without sending email.

  Parameters:

  • vehicleId (required) — string — TuneWorks vehicle ID selected for Share Build.
  • message — string — Optional message to include in the Share Build email.
  • setupIds — array — Optional TuneWorks setup IDs to include.
  • recipients — array — Recipient email addresses to preview.
  • sessionIds — array — Optional TuneWorks session IDs to include.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• get_user_settings read-only

  Read the connected user’s preferences, unit choices, and custom vehicle makes.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• update_user_preferences destructive

  Update selected preferences for the connected TuneWorks user.

  Parameters:

  • preferences (required) — object

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• update_unit_settings destructive

  Update unit-category choices for the connected TuneWorks user.

  Parameters:

  • settings (required) — array

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• create_vehicle_make

  Add a custom vehicle make to connected user settings.

  Parameters:

  • make (required) — string
  • teamId — string

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• update_vehicle_make destructive

  Rename or rescope a custom vehicle make.

  Parameters:

  • id (required) — number
  • make (required) — string
  • teamId — string

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• delete_vehicle_make destructive

  Permanently delete a custom vehicle make after explicit confirmation.

  Parameters:

  • id (required) — number
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• list_chart_channel_sets read-only

  List saved chart-channel sets.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• create_chart_channel_set

  Save a named set of chart channels.

  Parameters:

  • name (required) — string
  • channels (required) — array

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• mark_chart_channel_set_used

  Update the last-used time for a saved chart-channel set.

  Parameters:

  • id (required) — number

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• delete_chart_channel_set destructive

  Permanently delete a saved chart-channel set after explicit confirmation.

  Parameters:

  • id (required) — number
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• list_favorite_charts read-only

  List favorite charts for an accessible vehicle.

  Parameters:

  • vehicleId (required) — string

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• create_favorite_chart

  Save a favorite chart for an accessible vehicle and source log.

  Parameters:

  • vehicleId (required) — string
  • sourceLogId (required) — string
  • title (required) — string
  • chartConfig (required) — object
  • notes — string
  • source — string
  • channelSetId — number

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• delete_favorite_chart destructive

  Permanently delete a favorite chart after explicit confirmation.

  Parameters:

  • chartId (required) — number
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• get_vehicle_map_config read-only

  Read the saved map-channel configuration for an accessible vehicle.

  Parameters:

  • vehicleId (required) — string

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• save_vehicle_map_config destructive

  Create or replace the connected user’s complete map-channel configuration.

  Parameters:

  • vehicleId (required) — string
  • lapType (required) — string
  • selections (required) — object
  • channels (required) — object
  • signs — object

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• complete_maintenance

  Record completed maintenance in vehicle history and advance its tracker.

  Parameters:

  • vehicleId (required) — string
  • trackerId (required) — string
  • completedAt (required) — string
  • notes — string
  • mileage — number
  • logCount — number
  • engineHours — number
  • trackEvents — number

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• list_ecu_files read-only

  List ECU-file metadata, optionally scoped to an accessible TuneWorks vehicle. Supplying vehicleId enables vehicle-specific recovery guidance. Binary contents are never returned.

  Parameters:

  • vehicleId — string — Optional stable TuneWorks vehicle ID from an authorized garage response.

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• inspect_ecu_file read-only

  Inspect one authorized ECU file and optionally a decoded table. Binary contents are never returned.

  Parameters:

  • id (required) — string
  • table — string

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• process_ecu_file

  Start or retry processing for an existing ECU definition file. This does not upload, create, or read a file, and processing may consume compute and analysis resources.

  Parameters:

  • id (required) — string

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• retry_ecu_file

  Retry an eligible failed, already stored ECU file. MCP does not upload binaries.

  Parameters:

  • id (required) — string

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• delete_ecu_file destructive

  Permanently delete an authorized ECU file after explicit confirmation.

  Parameters:

  • id (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• send_share_build

  Emails selected TuneWorks vehicle, setup, and session details to up to three recipients. Explicit user confirmation is required.

  Parameters:

  • vehicleId (required) — string — TuneWorks vehicle ID selected for Share Build.
  • recipients (required) — array — Recipient email addresses. Share Build supports up to 3 recipients.
  • confirmed (required) — boolean — True indicates that the user explicitly confirmed the recipient list and selected build details.
  • message — string — Optional message to include in the Share Build email.
  • setupIds — array — Optional TuneWorks setup IDs to include.
  • sessionIds — array — Optional TuneWorks session IDs to include.

  Hints: read-only no · destructive no · idempotent not declared · open-world yes

• list_teams read-only

  List teams available to the connected user, or read one team’s settings.

  Parameters:

  • teamId — string

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• create_team

  Create a new team for the connected user.

  Parameters:

  • name (required) — string

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• rename_team destructive

  Replace a team’s name.

  Parameters:

  • teamId (required) — string
  • name (required) — string

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• update_team_member_role destructive

  Replace a team member’s role.

  Parameters:

  • teamId (required) — string
  • userId (required) — number
  • role (required) — string

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• remove_team_member destructive

  Remove a member from a team after explicit confirmation.

  Parameters:

  • teamId (required) — string
  • userId (required) — number
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• revoke_team_invite destructive

  Revoke a pending team invitation after explicit confirmation.

  Parameters:

  • teamId (required) — string
  • inviteId (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• leave_team destructive

  Remove the connected user from a team after explicit confirmation.

  Parameters:

  • teamId (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• delete_team destructive

  Delete a team after explicit confirmation.

  Parameters:

  • teamId (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• send_team_invite

  Create and email a team invitation only after explicit user confirmation.

  Parameters:

  • teamId (required) — string
  • email (required) — string
  • role (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive no · idempotent not declared · open-world yes

• list_custom_tracks read-only

  List custom tracks accessible to the connected user.

  Parameters:

  • limit — integer
  • query — string

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• get_custom_track read-only

  Read one accessible custom track.

  Parameters:

  • trackId (required) — string

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• create_custom_track

  Create a custom track for the connected user or an editable team.

  Parameters:

  • venue (required) — string
  • city — string
  • region — string
  • teamId — string
  • country — string
  • countryCode — string

  Hints: read-only no · destructive no · idempotent not declared · open-world no

• update_custom_track destructive

  Replace the editable fields and ownership scope of a custom track.

  Parameters:

  • trackId (required) — string
  • venue (required) — string
  • city — string
  • region — string
  • teamId — string
  • country — string
  • countryCode — string

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• delete_custom_track destructive

  Permanently delete a custom track after explicit confirmation.

  Parameters:

  • trackId (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world no

• list_object_attachments read-only

  List attachment metadata for an authorized object. Binary contents are unavailable through MCP.

  Parameters:

  • objectType (required) — string
  • objectId (required) — string

  Hints: read-only yes · destructive no · idempotent not declared · open-world no

• delete_object_attachment destructive

  Delete an object attachment from blob storage after explicit confirmation.

  Parameters:

  • fileId (required) — string
  • confirmed (required) — boolean

  Hints: read-only no · destructive yes · idempotent not declared · open-world yes

Repository

Measured by MCPYP probing. Untested fields are omitted, never estimated. Listing is always free; MCPYP never proxies calls or stores user tokens.