Citiwise

Measured conclusion: Deep-tested. L2 outcome: tools_ok.

UDCPR 2020 (Maharashtra) feasibility for a plot, with the clause behind every number.

Add to your agent

Copy this into your MCP client config:

{
  "mcpServers": {
    "Citiwise": {
      "url": "https://citiwise.in/mcp",
      "transport": "streamable-http"
    }
  }
}

Measured tools (9)

• feasibility read-only

  Use this when someone asks what they can build on a plot or piece of land in Maharashtra, wherever UDCPR 2020 applies (outside Greater Mumbai and the other areas regulation 1.1(i) leaves out; towns says which): FSI or FAR, built-up area, setbacks (margins), height, how many floors, parking or approvals under UDCPR 2020. People often ask in Marathi or Hindi, or mix them with English: जागा, प्लॉट, गुंठा, चटई क्षेत्र निर्देशांक (FSI), बांधकाम क्षेत्र (built-up), सामासिक अंतर (margins), किती मजले (how many floors), पार्किंग; give the area and road as they said them with area_unit and road_unit. Do not use for Greater Mumbai, for land prices or for building permission itself. Returns the UDCPR feasibility of one plot for one use: area statement, FSI, height limits, the margin on every side, the building that fits (and, where its floor is not a rectangle, the largest regular building inside it: building.regular), parking, water, sanitary fixtures, stairs and lifts, fire tanks, refuge area, open space and amenity space, and the NOCs the plot and building trigger; the floor counts around the fitted one (options) and the heights that change the rules (thresholds); the Proforma I area statement; premiums as shares of the ASR land rate, scrutiny fee and payment options; TDR loading; what applies (rainwater, solar, grey water, inclusive housing, open space, amenity, refuge, fire NOC); corner rounding; plot-origin options; power line clearance and TOD FSI when those inputs are given. Each value carries its UDCPR clause.

  Parameters:

  • town (required) — string — Maharashtra town, city or planning authority, e.g. Pune, Kolhapur, Nashik, PMRDA
  • area (required) — number — plot area as the user gave it, in m2 unless area_unit says sqft, guntha, acre or hectare: the least of 7/12, measurement sheet and site
  • use (required) — string — the use of the building: flats for flats; mix for flats with shops below; bung for a bungalow; row for row houses; shop for shops; office for offices; it for an IT building; hotel for a hotel; fuel for a fuel station; school for a school; college for a college; hospital for a hospital; public for a public building; assembly for a cinema, hall or mall; mangal for a mangal karyalaya; parking for a parking building; warehouse for a warehouse; factory for a factory
  • crz — string — the coastal regulation zone the plot is in: I (between the tide lines), II, or III within its No Development Zone. No TDR in the coastal zone (11.2.8(c)); development as the CRZ Notification allows (1.6(i))
  • tod — boolean — plot inside a TOD zone (14.2): Municipal Corporations, metropolitan authorities and CIDCO; the Nagpur Metro Rail Corridor by Table 14-P
  • beds — integer — beds: for hospitals, parking, water, sanitation and grey water; for hotels, water
  • road — number — width of the road in front, in m unless road_unit is ft, when there is one road and no sides
  • zone — string — nc non-congested, c congested (gaothan)
  • areas — object — the three areas of Appendix A item 1, in m2, for the area statement: ownership (the 7/12 or property card), sheet (the measurement sheet of the Land Records) and site (by the measurements); area is the least of those given
  • flats — integer — number of flats; with carpet, a one-type unit mix
  • green — string — green rating committed (IGBC / GRIHA / LEED tier) for the incentive FSI of 7.10 on basic FSI: 3%, 5% or 7%
  • rooms — integer — guest rooms, for hotel parking and sanitation
  • seats — integer — seats, for assembly parking
  • sides — array — every side, anticlockwise, starting at a road
  • stilt — boolean — parking on a stilt floor, left out of the FSI; default false
  • units — array — the unit mix, one entry per type, e.g. [{"type":"2 BHK","count":12,"carpet":60},{"type":"Shop","count":4,"carpet":25}]; parking takes each type in its own Table 8-B row; a count left out is worked out from the building
  • wings — array — a group housing project as wings, each with its own typical floor and floors; units then gives each type and its carpet only. Returns each wing's height, lifts, special building and the distance between wings (6.2.4), and the built-up the wings need against what the rules allow
  • carpet — number — carpet area of a flat, m2
  • margin — number — margin the developer needs, % of sales value; with the rates, gives what the land carries and the largest share of the flats for the landowner in a joint development
  • papers — array — the papers the facts were read from, when they were: 712 (the 7/12 extract or property card, for the area), sheet (the measurement sheet, for the sides and area), zone (the zone certificate or DP remark, for the zone, the road width, road widening and reservations), layout (the sanctioned layout or regularisation order). The study marks each fact as read from its paper or as told; no rule reads them
  • buy_tdr — boolean — false: the study is drawn without buying TDR, on basic and premium FSI with their ancillary area; default true. Either way, tdr_choice sets both side by side, with the most TDR is worth to this plot when sale_rate and build_cost are given
  • polygon — array — plot corners [x, y] in m, anticlockwise, one per side, side 1 first; needed for plots that are not rectangles
  • rc_rate — number — the ASR rate of RCC construction, Rs a m², for the land rate to construction rate ratio of Tables 7-C to 7-E
  • asr_rate — number — land rate of the plot in the Annual Statement of Rates, Rs a m2; gives premiums in rupees and the DRC to debit
  • land_use — string — the zone on the development or regional plan: residential, commercial, industrial, public / semi-public, agricultural, transport, green belt, loom industry cum residential (4.9), regional park (4.14), tourism development (4.15), afforestation (4.16), hill top (4.17), green zone 2 (4.18), forest, defence, mines and quarry, public utility, woodland corridor, special economic zone, airport (4.19 to 4.25)
  • measured — boolean — true: the polygon is the plot as measured on site (draw_plot gives it so), drawn as it is; area, the least of the areas of Appendix A item 1, may then be smaller than the polygon. Without it the drawing is scaled to area
  • tdr_rate — number — price of TDR, Rs a sq ft
  • area_unit — string — unit of area, road_widening and reservation as the user gave them; default m2. Citiwise converts and says so in units
  • basements — integer — levels of basement, for parking and services (9.11)
  • bathrooms — boolean — factories: whether bath-rooms are provided, for water (Table 12-A)
  • jda_offer — number — share of the flats a developer has offered the landowner in a joint development, %; with the rates, gives what the developer keeps at that share beside the share the plot carries
  • road_unit — string — unit of road and of each road side's width as the user gave them; default m
  • sale_rate — number — sale rate, Rs a sq ft of carpet area; with build_cost and tdr_rate gives an appraisal: sales value, construction, premiums, TDR and the surplus before land
  • build_cost — number — construction cost, Rs a sq ft of built-up area
  • flood_zone — string — the plot lies within the blue flood line (prohibitive: no construction, no TDR) or between the blue and red flood lines (restrictive: plinth above the red flood line) (3.1.3; 11.2.8(b))
  • land_price — number — asking price of the land when it is being bought, Rs for the whole plot; with the rates, gives the profit at that price and how far it sits from what the land carries
  • sprinklers — boolean — mixed building fully sprinklered with the travel distances kept: under the 1.3(93)(xiv) note it stays out of the special building rules up to 24 m with floors up to 750 m², subject to fire NOC
  • steep_area — number — m² of the plot steeper than 1 in 5: hill top and hill slope land, not built upon (3.1.1(iii); 4.2 (XIV))
  • use_carpet — number — carpet area of a non-residential use, or of the shops below flats, m2, for its parking and water; default the built-up that fits
  • buy_premium — boolean — false: the study is drawn without premium FSI (and without the Table 7-A higher FSI, which is taken on premium), on basic FSI, any TDR and the ancillary area; default true
  • handed_over — boolean — the road widening and reservation land is handed over to the Authority, for its development rights (11.2.4); default true
  • layout_kind — string — the land is laid out into plots, or developed as a group housing scheme; returns layout: the internal road widths of Tables 3A to 3C and what the layout carries (3.3, 3.4, 2.7.2)
  • other_costs — number — other costs (fees, finance, marketing), % of construction and the stilt floor
  • plot_origin — string — layout: sanctioned layout or sub-division; unauthorised: sub-divided after 11.01.1967 without permission; gunthewari: regularised under the Gunthewari Act
  • prepared_by — string — who is giving the study, as it should appear on its cover, e.g. a broker or developer
  • reservation — number — area of the plot under a DP reservation, in the unit of area
  • carpet_share — number — carpet area as a share of the built-up, 0.3 to 0.95 or 30 to 95 (default 0.8); sets the unit counts left out and so the sales value
  • floor_height — number — height of each upper floor, m
  • gaothan_belt — boolean — a Regional Plan village plot in the agricultural zone, within the belt around the gaothan or a town where 5.1.1 permits residential development, on a premium of a share of the land's ASR rate
  • parking_cost — number — construction cost of the stilt floor, Rs a sq ft; the stilt is free of FSI but built; default build_cost
  • prepared_for — string — who the study is for, as it should appear on its cover, e.g. the landowner or client
  • step_margins — boolean — true: step margins on upper floors (6.2.3(c)): each floor keeps the side and rear margin its own height needs, so lower floors are larger; 6 m at the ground for a special building
  • upper_floors — integer — floors above ground or stilt (G+3 is 3); omit to fit
  • access_length — number — the plot does not abut a public street: the length of the access way to it, m, measured to the street; 'road' is then the access way's width (3.2.2, 3.3.3)
  • avoid_special — boolean — true: keep the building out of the special building rules (1.3(93)(xiv)): no higher than 24 m, and for the uses the floor area reaches, each floor below 500 m² (750 m² for a sprinklered mixed building). Either way, special_choice sets the building kept out beside the special building, with what the special building brings
  • existing_kind — string — what stands on the plot, for redevelopment (7.4, 7.5, 7.6): a co-operative society's building, a tenanted building, a MHADA scheme building redeveloped by the society or by MHADA, or a bungalow; returns schemes with the figures
  • ground_height — number — height of the ground or stilt floor, m
  • power_line_kv — number — voltage of an overhead line near the plot, kV, for its clearance
  • road_widening — number — area of the plot under DP road widening, in the unit of area
  • allotted_basic — number — for a plot of a plotted layout, the basic FSI area in m² the layout plan allots it (3.9(iii)), up to the most the plot may receive
  • basement_flush — boolean — basement top flush with the ground: it may then run into the side and rear margins (9.11.1 proviso i)
  • slum_tenements — integer — eligible hutments on the plot, for slum rehabilitation (14.6, 14.7)
  • specified_area — string — Kolhapur: the characteristic specified area of Table 10-B (10.9.1) the plot is in, by Sr. No. ('1' for Rajarampuri) or the area's name; where the row has several plot sizes, Sr. No. and the plot row, e.g. '3.2'. Sets the Table 10-B margins and coverage and the Note 1 basic FSI. Pune: 'koregaon_park' (10.1.2). A Regional Plan area: an area of Chapter 5 with rules of its own, one of hill_station, station_near, station_far, tarapur, ratnagiri_pada, sindhudurg_t2, sindhudurg_t4, sindhudurg_t5, mp_buffer_edge, mp_buffer_gaothan, satara_core, satara_buffer, nagothane, wadi, rajpuri_usar, sector_r_lonavala, sector_r_kune, aurangabad_strip, ligo. Chapter 10 city areas, Pune: parvati_chatushrungi, arde, hemrl; Thane: ram_maruti, gokhale, express_highway, chemical_green_belt, chemical_low_density, air_force, defence_buffer, g1_yeur, g3_forest, eco_sensitive, defence_west_orange, defence_west_pink, defence_west_navy_blue, defence_west_yellow, defence_west_violet, defence_west_green, defence_east_orange, defence_east_pink, defence_east_yellow, defence_east_violet, defence_east_sky_blue; Nashik: tps1, gangapur_ambad; Vasai-Virar: low_density, eco_sensitive; Mira-Bhayandar: road_strip, manori_gorai_uttan, eco_sensitive; NMRDA: ring_road, township, gaothan_small, gaothan_large
  • existing_carpet — number — carpet area of the existing tenements together, m² (7.4.2, 7.6)
  • reservation_type — string — what the DP reservation on the plot is for; with 'reservation', returns accommodation_reservation: developing it by its owner under 11.1, Table 11-A
  • existing_built_up — number — authorised built-up of the existing building, m², with its TDR and premium FSI (7.5, 7.6)
  • existing_tenements — integer — tenements in the existing building (7.4.2, 7.6)
  • road_widening_side — integer — side number (1-based) that the road widening strip comes off; default the first road side
  • tdr_generating_rate — number — ASR land rate of the TDR's generating plot, Rs a m2 (11.2.6)
  • internal_road_length — number — with layout_kind, the length of the longest internal road, m, from the farthest plot or building to the public street (3.3.3)

  Hints: read-only yes · destructive no · idempotent yes · open-world no

• compare_uses read-only

  Use this when someone wants to know which uses are allowed on a plot in Maharashtra, or how built-up differs between uses on the same land. Returns every use on the same land in a fixed order: allowed or the reason not, conditions, clause, and built-up with and without TDR.

  Parameters:

  • town (required) — string — Maharashtra town, city or planning authority, e.g. Pune, Kolhapur, Nashik, PMRDA
  • area (required) — number — plot area as the user gave it, in m2 unless area_unit says sqft, guntha, acre or hectare: the least of 7/12, measurement sheet and site
  • crz — string — the coastal regulation zone the plot is in: I (between the tide lines), II, or III within its No Development Zone. No TDR in the coastal zone (11.2.8(c)); development as the CRZ Notification allows (1.6(i))
  • tod — boolean — plot inside a TOD zone (14.2): Municipal Corporations, metropolitan authorities and CIDCO; the Nagpur Metro Rail Corridor by Table 14-P
  • beds — integer — beds: for hospitals, parking, water, sanitation and grey water; for hotels, water
  • road — number — width of the road in front, in m unless road_unit is ft, when there is one road and no sides
  • zone — string — nc non-congested, c congested (gaothan)
  • areas — object — the three areas of Appendix A item 1, in m2, for the area statement: ownership (the 7/12 or property card), sheet (the measurement sheet of the Land Records) and site (by the measurements); area is the least of those given
  • flats — integer — number of flats; with carpet, a one-type unit mix
  • green — string — green rating committed (IGBC / GRIHA / LEED tier) for the incentive FSI of 7.10 on basic FSI: 3%, 5% or 7%
  • rooms — integer — guest rooms, for hotel parking and sanitation
  • seats — integer — seats, for assembly parking
  • sides — array — every side, anticlockwise, starting at a road
  • stilt — boolean — parking on a stilt floor, left out of the FSI; default false
  • units — array — the unit mix, one entry per type, e.g. [{"type":"2 BHK","count":12,"carpet":60},{"type":"Shop","count":4,"carpet":25}]; parking takes each type in its own Table 8-B row; a count left out is worked out from the building
  • wings — array — a group housing project as wings, each with its own typical floor and floors; units then gives each type and its carpet only. Returns each wing's height, lifts, special building and the distance between wings (6.2.4), and the built-up the wings need against what the rules allow
  • carpet — number — carpet area of a flat, m2
  • margin — number — margin the developer needs, % of sales value; with the rates, gives what the land carries and the largest share of the flats for the landowner in a joint development
  • papers — array — the papers the facts were read from, when they were: 712 (the 7/12 extract or property card, for the area), sheet (the measurement sheet, for the sides and area), zone (the zone certificate or DP remark, for the zone, the road width, road widening and reservations), layout (the sanctioned layout or regularisation order). The study marks each fact as read from its paper or as told; no rule reads them
  • buy_tdr — boolean — false: the study is drawn without buying TDR, on basic and premium FSI with their ancillary area; default true. Either way, tdr_choice sets both side by side, with the most TDR is worth to this plot when sale_rate and build_cost are given
  • polygon — array — plot corners [x, y] in m, anticlockwise, one per side, side 1 first; needed for plots that are not rectangles
  • rc_rate — number — the ASR rate of RCC construction, Rs a m², for the land rate to construction rate ratio of Tables 7-C to 7-E
  • asr_rate — number — land rate of the plot in the Annual Statement of Rates, Rs a m2; gives premiums in rupees and the DRC to debit
  • land_use — string — the zone on the development or regional plan: residential, commercial, industrial, public / semi-public, agricultural, transport, green belt, loom industry cum residential (4.9), regional park (4.14), tourism development (4.15), afforestation (4.16), hill top (4.17), green zone 2 (4.18), forest, defence, mines and quarry, public utility, woodland corridor, special economic zone, airport (4.19 to 4.25)
  • measured — boolean — true: the polygon is the plot as measured on site (draw_plot gives it so), drawn as it is; area, the least of the areas of Appendix A item 1, may then be smaller than the polygon. Without it the drawing is scaled to area
  • tdr_rate — number — price of TDR, Rs a sq ft
  • area_unit — string — unit of area, road_widening and reservation as the user gave them; default m2. Citiwise converts and says so in units
  • basements — integer — levels of basement, for parking and services (9.11)
  • bathrooms — boolean — factories: whether bath-rooms are provided, for water (Table 12-A)
  • jda_offer — number — share of the flats a developer has offered the landowner in a joint development, %; with the rates, gives what the developer keeps at that share beside the share the plot carries
  • road_unit — string — unit of road and of each road side's width as the user gave them; default m
  • sale_rate — number — sale rate, Rs a sq ft of carpet area; with build_cost and tdr_rate gives an appraisal: sales value, construction, premiums, TDR and the surplus before land
  • build_cost — number — construction cost, Rs a sq ft of built-up area
  • flood_zone — string — the plot lies within the blue flood line (prohibitive: no construction, no TDR) or between the blue and red flood lines (restrictive: plinth above the red flood line) (3.1.3; 11.2.8(b))
  • land_price — number — asking price of the land when it is being bought, Rs for the whole plot; with the rates, gives the profit at that price and how far it sits from what the land carries
  • sprinklers — boolean — mixed building fully sprinklered with the travel distances kept: under the 1.3(93)(xiv) note it stays out of the special building rules up to 24 m with floors up to 750 m², subject to fire NOC
  • steep_area — number — m² of the plot steeper than 1 in 5: hill top and hill slope land, not built upon (3.1.1(iii); 4.2 (XIV))
  • use_carpet — number — carpet area of a non-residential use, or of the shops below flats, m2, for its parking and water; default the built-up that fits
  • buy_premium — boolean — false: the study is drawn without premium FSI (and without the Table 7-A higher FSI, which is taken on premium), on basic FSI, any TDR and the ancillary area; default true
  • handed_over — boolean — the road widening and reservation land is handed over to the Authority, for its development rights (11.2.4); default true
  • layout_kind — string — the land is laid out into plots, or developed as a group housing scheme; returns layout: the internal road widths of Tables 3A to 3C and what the layout carries (3.3, 3.4, 2.7.2)
  • other_costs — number — other costs (fees, finance, marketing), % of construction and the stilt floor
  • plot_origin — string — layout: sanctioned layout or sub-division; unauthorised: sub-divided after 11.01.1967 without permission; gunthewari: regularised under the Gunthewari Act
  • prepared_by — string — who is giving the study, as it should appear on its cover, e.g. a broker or developer
  • reservation — number — area of the plot under a DP reservation, in the unit of area
  • carpet_share — number — carpet area as a share of the built-up, 0.3 to 0.95 or 30 to 95 (default 0.8); sets the unit counts left out and so the sales value
  • floor_height — number — height of each upper floor, m
  • gaothan_belt — boolean — a Regional Plan village plot in the agricultural zone, within the belt around the gaothan or a town where 5.1.1 permits residential development, on a premium of a share of the land's ASR rate
  • parking_cost — number — construction cost of the stilt floor, Rs a sq ft; the stilt is free of FSI but built; default build_cost
  • prepared_for — string — who the study is for, as it should appear on its cover, e.g. the landowner or client
  • step_margins — boolean — true: step margins on upper floors (6.2.3(c)): each floor keeps the side and rear margin its own height needs, so lower floors are larger; 6 m at the ground for a special building
  • access_length — number — the plot does not abut a public street: the length of the access way to it, m, measured to the street; 'road' is then the access way's width (3.2.2, 3.3.3)
  • avoid_special — boolean — true: keep the building out of the special building rules (1.3(93)(xiv)): no higher than 24 m, and for the uses the floor area reaches, each floor below 500 m² (750 m² for a sprinklered mixed building). Either way, special_choice sets the building kept out beside the special building, with what the special building brings
  • existing_kind — string — what stands on the plot, for redevelopment (7.4, 7.5, 7.6): a co-operative society's building, a tenanted building, a MHADA scheme building redeveloped by the society or by MHADA, or a bungalow; returns schemes with the figures
  • ground_height — number — height of the ground or stilt floor, m
  • power_line_kv — number — voltage of an overhead line near the plot, kV, for its clearance
  • road_widening — number — area of the plot under DP road widening, in the unit of area
  • allotted_basic — number — for a plot of a plotted layout, the basic FSI area in m² the layout plan allots it (3.9(iii)), up to the most the plot may receive
  • basement_flush — boolean — basement top flush with the ground: it may then run into the side and rear margins (9.11.1 proviso i)
  • slum_tenements — integer — eligible hutments on the plot, for slum rehabilitation (14.6, 14.7)
  • specified_area — string — Kolhapur: the characteristic specified area of Table 10-B (10.9.1) the plot is in, by Sr. No. ('1' for Rajarampuri) or the area's name; where the row has several plot sizes, Sr. No. and the plot row, e.g. '3.2'. Sets the Table 10-B margins and coverage and the Note 1 basic FSI. Pune: 'koregaon_park' (10.1.2). A Regional Plan area: an area of Chapter 5 with rules of its own, one of hill_station, station_near, station_far, tarapur, ratnagiri_pada, sindhudurg_t2, sindhudurg_t4, sindhudurg_t5, mp_buffer_edge, mp_buffer_gaothan, satara_core, satara_buffer, nagothane, wadi, rajpuri_usar, sector_r_lonavala, sector_r_kune, aurangabad_strip, ligo. Chapter 10 city areas, Pune: parvati_chatushrungi, arde, hemrl; Thane: ram_maruti, gokhale, express_highway, chemical_green_belt, chemical_low_density, air_force, defence_buffer, g1_yeur, g3_forest, eco_sensitive, defence_west_orange, defence_west_pink, defence_west_navy_blue, defence_west_yellow, defence_west_violet, defence_west_green, defence_east_orange, defence_east_pink, defence_east_yellow, defence_east_violet, defence_east_sky_blue; Nashik: tps1, gangapur_ambad; Vasai-Virar: low_density, eco_sensitive; Mira-Bhayandar: road_strip, manori_gorai_uttan, eco_sensitive; NMRDA: ring_road, township, gaothan_small, gaothan_large
  • existing_carpet — number — carpet area of the existing tenements together, m² (7.4.2, 7.6)
  • reservation_type — string — what the DP reservation on the plot is for; with 'reservation', returns accommodation_reservation: developing it by its owner under 11.1, Table 11-A
  • existing_built_up — number — authorised built-up of the existing building, m², with its TDR and premium FSI (7.5, 7.6)
  • existing_tenements — integer — tenements in the existing building (7.4.2, 7.6)
  • road_widening_side — integer — side number (1-based) that the road widening strip comes off; default the first road side
  • tdr_generating_rate — number — ASR land rate of the TDR's generating plot, Rs a m2 (11.2.6)
  • internal_road_length — number — with layout_kind, the length of the longest internal road, m, from the farthest plot or building to the public street (3.3.3)

  Hints: read-only yes · destructive no · idempotent yes · open-world no

• check_design read-only

  Use this when someone has a proposed building on a plot in Maharashtra and wants to know whether it meets UDCPR. Checks a proposal's built-up, height and margins (one per side, in side order) against UDCPR, with allowed, proposed and pass or fail per item. Margins need the height or the upper floors with them.

  Parameters:

  • town (required) — string — Maharashtra town, city or planning authority, e.g. Pune, Kolhapur, Nashik, PMRDA
  • area (required) — number — plot area as the user gave it, in m2 unless area_unit says sqft, guntha, acre or hectare: the least of 7/12, measurement sheet and site
  • use (required) — string — the use of the building: flats for flats; mix for flats with shops below; bung for a bungalow; row for row houses; shop for shops; office for offices; it for an IT building; hotel for a hotel; fuel for a fuel station; school for a school; college for a college; hospital for a hospital; public for a public building; assembly for a cinema, hall or mall; mangal for a mangal karyalaya; parking for a parking building; warehouse for a warehouse; factory for a factory
  • proposed (required) — object — the proposal; at least one of built_up, height, upper_floors or margins
  • crz — string — the coastal regulation zone the plot is in: I (between the tide lines), II, or III within its No Development Zone. No TDR in the coastal zone (11.2.8(c)); development as the CRZ Notification allows (1.6(i))
  • tod — boolean — plot inside a TOD zone (14.2): Municipal Corporations, metropolitan authorities and CIDCO; the Nagpur Metro Rail Corridor by Table 14-P
  • beds — integer — beds: for hospitals, parking, water, sanitation and grey water; for hotels, water
  • road — number — width of the road in front, in m unless road_unit is ft, when there is one road and no sides
  • zone — string — nc non-congested, c congested (gaothan)
  • areas — object — the three areas of Appendix A item 1, in m2, for the area statement: ownership (the 7/12 or property card), sheet (the measurement sheet of the Land Records) and site (by the measurements); area is the least of those given
  • flats — integer — number of flats; with carpet, a one-type unit mix
  • green — string — green rating committed (IGBC / GRIHA / LEED tier) for the incentive FSI of 7.10 on basic FSI: 3%, 5% or 7%
  • rooms — integer — guest rooms, for hotel parking and sanitation
  • seats — integer — seats, for assembly parking
  • sides — array — every side, anticlockwise, starting at a road
  • stilt — boolean — parking on a stilt floor, left out of the FSI; default false
  • units — array — the unit mix, one entry per type, e.g. [{"type":"2 BHK","count":12,"carpet":60},{"type":"Shop","count":4,"carpet":25}]; parking takes each type in its own Table 8-B row; a count left out is worked out from the building
  • wings — array — a group housing project as wings, each with its own typical floor and floors; units then gives each type and its carpet only. Returns each wing's height, lifts, special building and the distance between wings (6.2.4), and the built-up the wings need against what the rules allow
  • carpet — number — carpet area of a flat, m2
  • margin — number — margin the developer needs, % of sales value; with the rates, gives what the land carries and the largest share of the flats for the landowner in a joint development
  • papers — array — the papers the facts were read from, when they were: 712 (the 7/12 extract or property card, for the area), sheet (the measurement sheet, for the sides and area), zone (the zone certificate or DP remark, for the zone, the road width, road widening and reservations), layout (the sanctioned layout or regularisation order). The study marks each fact as read from its paper or as told; no rule reads them
  • buy_tdr — boolean — false: the study is drawn without buying TDR, on basic and premium FSI with their ancillary area; default true. Either way, tdr_choice sets both side by side, with the most TDR is worth to this plot when sale_rate and build_cost are given
  • polygon — array — plot corners [x, y] in m, anticlockwise, one per side, side 1 first; needed for plots that are not rectangles
  • rc_rate — number — the ASR rate of RCC construction, Rs a m², for the land rate to construction rate ratio of Tables 7-C to 7-E
  • asr_rate — number — land rate of the plot in the Annual Statement of Rates, Rs a m2; gives premiums in rupees and the DRC to debit
  • land_use — string — the zone on the development or regional plan: residential, commercial, industrial, public / semi-public, agricultural, transport, green belt, loom industry cum residential (4.9), regional park (4.14), tourism development (4.15), afforestation (4.16), hill top (4.17), green zone 2 (4.18), forest, defence, mines and quarry, public utility, woodland corridor, special economic zone, airport (4.19 to 4.25)
  • measured — boolean — true: the polygon is the plot as measured on site (draw_plot gives it so), drawn as it is; area, the least of the areas of Appendix A item 1, may then be smaller than the polygon. Without it the drawing is scaled to area
  • tdr_rate — number — price of TDR, Rs a sq ft
  • area_unit — string — unit of area, road_widening and reservation as the user gave them; default m2. Citiwise converts and says so in units
  • basements — integer — levels of basement, for parking and services (9.11)
  • bathrooms — boolean — factories: whether bath-rooms are provided, for water (Table 12-A)
  • jda_offer — number — share of the flats a developer has offered the landowner in a joint development, %; with the rates, gives what the developer keeps at that share beside the share the plot carries
  • road_unit — string — unit of road and of each road side's width as the user gave them; default m
  • sale_rate — number — sale rate, Rs a sq ft of carpet area; with build_cost and tdr_rate gives an appraisal: sales value, construction, premiums, TDR and the surplus before land
  • build_cost — number — construction cost, Rs a sq ft of built-up area
  • flood_zone — string — the plot lies within the blue flood line (prohibitive: no construction, no TDR) or between the blue and red flood lines (restrictive: plinth above the red flood line) (3.1.3; 11.2.8(b))
  • land_price — number — asking price of the land when it is being bought, Rs for the whole plot; with the rates, gives the profit at that price and how far it sits from what the land carries
  • sprinklers — boolean — mixed building fully sprinklered with the travel distances kept: under the 1.3(93)(xiv) note it stays out of the special building rules up to 24 m with floors up to 750 m², subject to fire NOC
  • steep_area — number — m² of the plot steeper than 1 in 5: hill top and hill slope land, not built upon (3.1.1(iii); 4.2 (XIV))
  • use_carpet — number — carpet area of a non-residential use, or of the shops below flats, m2, for its parking and water; default the built-up that fits
  • buy_premium — boolean — false: the study is drawn without premium FSI (and without the Table 7-A higher FSI, which is taken on premium), on basic FSI, any TDR and the ancillary area; default true
  • handed_over — boolean — the road widening and reservation land is handed over to the Authority, for its development rights (11.2.4); default true
  • layout_kind — string — the land is laid out into plots, or developed as a group housing scheme; returns layout: the internal road widths of Tables 3A to 3C and what the layout carries (3.3, 3.4, 2.7.2)
  • other_costs — number — other costs (fees, finance, marketing), % of construction and the stilt floor
  • plot_origin — string — layout: sanctioned layout or sub-division; unauthorised: sub-divided after 11.01.1967 without permission; gunthewari: regularised under the Gunthewari Act
  • prepared_by — string — who is giving the study, as it should appear on its cover, e.g. a broker or developer
  • reservation — number — area of the plot under a DP reservation, in the unit of area
  • carpet_share — number — carpet area as a share of the built-up, 0.3 to 0.95 or 30 to 95 (default 0.8); sets the unit counts left out and so the sales value
  • floor_height — number — height of each upper floor, m
  • gaothan_belt — boolean — a Regional Plan village plot in the agricultural zone, within the belt around the gaothan or a town where 5.1.1 permits residential development, on a premium of a share of the land's ASR rate
  • parking_cost — number — construction cost of the stilt floor, Rs a sq ft; the stilt is free of FSI but built; default build_cost
  • prepared_for — string — who the study is for, as it should appear on its cover, e.g. the landowner or client
  • step_margins — boolean — true: step margins on upper floors (6.2.3(c)): each floor keeps the side and rear margin its own height needs, so lower floors are larger; 6 m at the ground for a special building
  • access_length — number — the plot does not abut a public street: the length of the access way to it, m, measured to the street; 'road' is then the access way's width (3.2.2, 3.3.3)
  • avoid_special — boolean — true: keep the building out of the special building rules (1.3(93)(xiv)): no higher than 24 m, and for the uses the floor area reaches, each floor below 500 m² (750 m² for a sprinklered mixed building). Either way, special_choice sets the building kept out beside the special building, with what the special building brings
  • existing_kind — string — what stands on the plot, for redevelopment (7.4, 7.5, 7.6): a co-operative society's building, a tenanted building, a MHADA scheme building redeveloped by the society or by MHADA, or a bungalow; returns schemes with the figures
  • ground_height — number — height of the ground or stilt floor, m
  • power_line_kv — number — voltage of an overhead line near the plot, kV, for its clearance
  • road_widening — number — area of the plot under DP road widening, in the unit of area
  • allotted_basic — number — for a plot of a plotted layout, the basic FSI area in m² the layout plan allots it (3.9(iii)), up to the most the plot may receive
  • basement_flush — boolean — basement top flush with the ground: it may then run into the side and rear margins (9.11.1 proviso i)
  • slum_tenements — integer — eligible hutments on the plot, for slum rehabilitation (14.6, 14.7)
  • specified_area — string — Kolhapur: the characteristic specified area of Table 10-B (10.9.1) the plot is in, by Sr. No. ('1' for Rajarampuri) or the area's name; where the row has several plot sizes, Sr. No. and the plot row, e.g. '3.2'. Sets the Table 10-B margins and coverage and the Note 1 basic FSI. Pune: 'koregaon_park' (10.1.2). A Regional Plan area: an area of Chapter 5 with rules of its own, one of hill_station, station_near, station_far, tarapur, ratnagiri_pada, sindhudurg_t2, sindhudurg_t4, sindhudurg_t5, mp_buffer_edge, mp_buffer_gaothan, satara_core, satara_buffer, nagothane, wadi, rajpuri_usar, sector_r_lonavala, sector_r_kune, aurangabad_strip, ligo. Chapter 10 city areas, Pune: parvati_chatushrungi, arde, hemrl; Thane: ram_maruti, gokhale, express_highway, chemical_green_belt, chemical_low_density, air_force, defence_buffer, g1_yeur, g3_forest, eco_sensitive, defence_west_orange, defence_west_pink, defence_west_navy_blue, defence_west_yellow, defence_west_violet, defence_west_green, defence_east_orange, defence_east_pink, defence_east_yellow, defence_east_violet, defence_east_sky_blue; Nashik: tps1, gangapur_ambad; Vasai-Virar: low_density, eco_sensitive; Mira-Bhayandar: road_strip, manori_gorai_uttan, eco_sensitive; NMRDA: ring_road, township, gaothan_small, gaothan_large
  • existing_carpet — number — carpet area of the existing tenements together, m² (7.4.2, 7.6)
  • reservation_type — string — what the DP reservation on the plot is for; with 'reservation', returns accommodation_reservation: developing it by its owner under 11.1, Table 11-A
  • existing_built_up — number — authorised built-up of the existing building, m², with its TDR and premium FSI (7.5, 7.6)
  • existing_tenements — integer — tenements in the existing building (7.4.2, 7.6)
  • road_widening_side — integer — side number (1-based) that the road widening strip comes off; default the first road side
  • tdr_generating_rate — number — ASR land rate of the TDR's generating plot, Rs a m2 (11.2.6)
  • internal_road_length — number — with layout_kind, the length of the longest internal road, m, from the farthest plot or building to the public street (3.3.3)

  Hints: read-only yes · destructive no · idempotent yes · open-world no

• clause read-only

  Use this when someone asks what a specific UDCPR regulation or table says. Returns the UDCPR text of a regulation or table by its number, such as '6.2.6', '11.2.4' or 'Table 6-G'.

  Parameters:

  • ref (required) — string — a regulation or table number, such as 6.2.6, 11.2.4 or Table 6-G

  Hints: read-only yes · destructive no · idempotent yes · open-world no

• search_udcpr read-only

  Use this when someone asks where UDCPR deals with a topic, such as refuge areas or rainwater harvesting. Returns lines of UDCPR that contain all the given words, with their chapter; a regulation's own heading first.

  Parameters:

  • words (required) — string — words that must all appear on the line, such as refuge area

  Hints: read-only yes · destructive no · idempotent yes · open-world no

• towns read-only

  Use this when the town or planning authority of a plot is unclear or spelt differently. Returns Maharashtra towns and authorities with their kind and class; every one when no query is given.

  Parameters:

  • query — string — part of a name; leave out for every town and authority

  Hints: read-only yes · destructive no · idempotent yes · open-world no

• draw_plot read-only

  Use this when a plot's shape is given as measurements rather than as one area: side lengths with the angles at the corners, or with diagonals, or both, as on a hand-drawn sketch, a measurement sheet, a survey or a photo of any of them; or the corners themselves. Read the figures as written (feet and inches such as 40'6", the area as on the 7/12 in guntha, acre or H.R.); a side left unmeasured may be null where the rest fix it. Works out the exact corners, fitting every figure by least squares when more are given than needed, reports how far each sits from the plot (closing side, angle sum, spare diagonals, stated area), refuses a misfit no tape makes, and returns the polygon and sides to pass to feasibility, the statement of area by the triangulation method (UDCPR 2.2.3(iii): lettered triangles, each by Heron from its sides as printed, the polygon rebuilt from the same lengths), a link that opens the plot drawn in Citiwise, and, when town and use are given, the feasibility with its report. Do not use for a plot described only by its area and road width; call feasibility directly.

  Parameters:

  • sides (required) — array — every side in order round the plot, either direction; at least one is a road
  • use — string — the use of the building: flats for flats; mix for flats with shops below; bung for a bungalow; row for row houses; shop for shops; office for offices; it for an IT building; hotel for a hotel; fuel for a fuel station; school for a school; college for a college; hospital for a hospital; public for a public building; assembly for a cinema, hall or mall; mangal for a mangal karyalaya; parking for a parking building; warehouse for a warehouse; factory for a factory
  • town — string — with use: also run the feasibility
  • unit — string — unit of every bare number among the lengths and road widths; default m
  • zone — string — with town and use: nc non-congested, c congested (gaothan)
  • angles — array — interior angle in degrees at each corner; corner i is where side i begins; null where not measured
  • polygon — array — the corners [x, y] instead of lengths and angles, one per side
  • area_unit — string — unit of stated_area when it is a bare number; default m2 (sq ft with unit ft); hr is hectare-are as on a 7/12
  • diagonals — array — corner-to-corner distances; a plot of n sides needs n - 3, each running across the inside of the plot; lengths alone can fit more than one plot, and the answer then names the corner that needs its angle or one more diagonal
  • stated_area — ['number', 'string'] — the area on the 7/12, property card or measurement sheet, to check against, as written: 5 guntha, 0.12.50 H.R., 5400 sq ft
  • right_angles — boolean — true when every corner of a four-sided plot is square

  Hints: read-only yes · destructive no · idempotent yes · open-world no

• search read-only

  Use this to find UDCPR regulations and tables, a town's page, or what a term means, on any topic: refuge area, marginal distance on a 12 m road, Table 6-G, parking for flats, Kolhapur, what carpet area or TDR is. Returns results, each with an id to pass to fetch, a title and a url to cite.

  Parameters:

  • query (required) — string — words, a regulation number such as 6.2.6, a table such as Table 8-B, or a town

  Hints: read-only yes · destructive no · idempotent yes · open-world no

• fetch read-only

  Use this to read one result of search in full: a UDCPR regulation or table in its own words as notified, what a town is under UDCPR with the figures for a common plot there, or a term in plain language with UDCPR's own definition. Returns id, title, text, url to cite, and metadata.

  Parameters:

  • id (required) — string — an id from search, such as udcpr/6-2-6, udcpr/table-6-g, towns/kolhapur or glossary/carpet

  Hints: read-only yes · destructive no · idempotent yes · open-world no

Publisher website

Measured by MCPYP probing. Untested fields are omitted, never estimated. Listing is always free; MCPYP never proxies calls or stores user tokens.