io.github.trondbjoroy/norway-location-transport-mcp

Measured conclusion: Deep-tested. L2 outcome: tools_ok.

Norwegian transport (Entur) and geodata (Kartverket): trips, departures, addresses, elevation.

Add to your agent

Copy this into your MCP client config:

{
  "mcpServers": {
    "norway-location-transport-mcp": {
      "url": "https://norway-location-transport-mcp.met-mcp-worker.workers.dev/mcp",
      "transport": "streamable-http"
    }
  }
}

Measured tools (21)

• search_address

  Search official Norwegian addresses (Kartverket) and get coordinates. Use `query` for free text, or the specific fields for a structured search. Wildcards with `*` are supported (e.g. street 'Storg*'). Returns coordinates, postal code, municipality, and cadastral numbers for each match.

  Parameters:

  • query — string — Free-text address, e.g. 'Karl Johans gate 1, Oslo'. Supports the * wildcard.
  • number — integer — House number (nummer)
  • street — string — Street name (adressenavn). Supports the * wildcard.
  • max_results — integer — Maximum number of matches to return
  • postal_code — string — Postal code (postnummer), e.g. '0155'
  • municipality_number — string — 4-digit municipality code (kommunenummer), e.g. '0301' for Oslo

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• find_addresses_near

  Find all official addresses within a radius of a coordinate (Kartverket). Each result includes its distance from the point. Good for 'what is at this location?'.

  Parameters:

  • latitude (required) — number — Latitude in decimal degrees (WGS84). Norway spans about 57–72°N.
  • longitude (required) — number — Longitude in decimal degrees (WGS84). Norway spans about 4–31°E.
  • radius_m — integer — Search radius in metres
  • max_results — integer — Maximum number of addresses to return

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• validate_address

  Check whether a free-text address exists in the official register and return its normalized form with coordinates. Uses fuzzy matching, so it also corrects small spelling errors. Returns `valid`, the best normalized match, and alternatives.

  Parameters:

  • address (required) — string — Address to validate, e.g. 'karl johans gt 1 oslo'

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• search_place_names

  Search official Norwegian place names (Kartverket Sentralt stedsnavnregister). Returns each name's feature type (e.g. Fjell, Innsjø, By), municipality, county, and coordinates. Supports the * wildcard and corrects small spelling errors.

  Parameters:

  • query (required) — string — Place name to search for, e.g. 'Galdhøpiggen'. Supports the * wildcard.
  • max_results — integer — Maximum number of matches to return

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• find_place_names_near

  Find the nearest official named features to a coordinate (Kartverket). Each result includes its feature type and distance from the point.

  Parameters:

  • latitude (required) — number — Latitude in decimal degrees (WGS84). Norway spans about 57–72°N.
  • longitude (required) — number — Longitude in decimal degrees (WGS84). Norway spans about 4–31°E.
  • radius_m — integer — Search radius in metres
  • max_results — integer — Maximum number of features to return

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• get_elevation

  Get the terrain elevation (metres above sea level) at a coordinate from the Norwegian national elevation model (Kartverket DTM). Covers mainland Norway.

  Parameters:

  • latitude (required) — number — Latitude in decimal degrees (WGS84). Norway spans about 57–72°N.
  • longitude (required) — number — Longitude in decimal degrees (WGS84). Norway spans about 4–31°E.

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• get_elevation_profile

  Sample the terrain elevation evenly along a path of coordinates (Kartverket DTM) and return the profile plus total distance, ascent, and descent. Useful for hikes and routes. Give the path vertices in order; `samples` controls resolution.

  Parameters:

  • path (required) — array — Ordered path vertices (at least 2). The path is sampled evenly between them.
  • samples — integer — Number of evenly spaced points to sample along the whole path

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• transform_coordinates

  Convert a coordinate between reference systems using Kartverket's transformer. Give EPSG codes for source and target. Axis order: x is easting (longitude for geographic systems), y is northing (latitude). Common EPSG codes: 4326 WGS84, 4258 EUREF89 (both lon/lat), 25832 UTM32/EUREF89, 25833 UTM33, 25835 UTM35 (east/north in metres).

  Parameters:

  • x (required) — number — Easting, or longitude for a geographic system (e.g. 4326/4258)
  • y (required) — number — Northing, or latitude for a geographic system
  • from_epsg (required) — integer — Source EPSG code, e.g. 4326
  • to_epsg (required) — integer — Target EPSG code, e.g. 25833

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• lookup_admin_unit

  Find which municipality (kommune) and county (fylke) a location falls in, with official codes (Kartverket). Give either a coordinate or a free-text address.

  Parameters:

  • address — string — Free-text address, used if no coordinate is given
  • latitude — number — Latitude in decimal degrees (WGS84). Norway spans about 57–72°N.
  • longitude — number — Longitude in decimal degrees (WGS84). Norway spans about 4–31°E.

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• lookup_property

  Look up cadastral (matrikkel) identifiers for a property via the open address register (Kartverket): municipality number, gårdsnummer (gnr), bruksnummer (bnr), and festenummer. Give a free-text address or a coordinate. Full ownership data requires Kartverket's authenticated Matrikkel API; this returns the open address-linked identifiers.

  Parameters:

  • address — string — Free-text address
  • latitude — number — Latitude in decimal degrees (WGS84). Norway spans about 57–72°N.
  • longitude — number — Longitude in decimal degrees (WGS84). Norway spans about 4–31°E.
  • max_results — integer — Maximum number of properties to return

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• resolve_stop_place

  Turn a place or address into Entur Stop Place IDs (public transport stops/stations). Use the returned ID with the departure, trip, accessibility, quay, and fare-zone tools.

  Parameters:

  • query (required) — string — Place or stop name, e.g. 'Oslo S' or 'Bergen busstasjon'
  • max_results — integer — Maximum number of stops to return

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• find_stops_near

  Reverse-geocode a coordinate to the nearest public transport stop places (Entur), each with its distance. Use the returned IDs with the departure and trip tools.

  Parameters:

  • latitude (required) — number — Latitude in decimal degrees (WGS84)
  • longitude (required) — number — Longitude in decimal degrees (WGS84)
  • radius_m — integer — Search radius in metres
  • max_results — integer — Maximum number of stops to return

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• plan_trip

  Plan a point-to-point public transport journey in Norway (Entur JourneyPlanner). Give each endpoint either as a Stop Place ID or as coordinates. Optionally set a departure or arrival time, filter transport modes, and set walk speed. Returns trip patterns with legs, modes, durations, and realtime times.

  Parameters:

  • to_place — string — Destination Stop Place ID
  • arrive_by — boolean — If true, date_time is the desired arrival time instead of departure time
  • date_time — string — ISO 8601 time, e.g. '2026-08-24T09:00:00+02:00'. Defaults to now.
  • from_place — string — Origin Stop Place ID (from resolve_stop_place)
  • walk_speed — number — Walking speed in metres per second (default ~1.3)
  • to_latitude — number — Latitude in decimal degrees (WGS84)
  • to_longitude — number — Longitude in decimal degrees (WGS84)
  • from_latitude — number — Latitude in decimal degrees (WGS84)
  • from_longitude — number — Longitude in decimal degrees (WGS84)
  • transport_modes — array — Restrict to these transit modes, e.g. ['bus','tram']. Omit for all modes.
  • num_trip_patterns — integer — How many alternative trips to return

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• get_departures

  Get the next departures from a stop place (Entur), including realtime delays and cancellations. Each departure shows line, destination, scheduled and expected times, delay, platform, and whether it is cancelled.

  Parameters:

  • stop_place_id (required) — string — Entur Stop Place ID, e.g. 'NSR:StopPlace:59872'. Get one from resolve_stop_place.
  • count — integer — How many upcoming departures to return

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• get_realtime_status

  Get a realtime health summary. For a stop, pass stop_place_id: it summarizes how many upcoming departures are on time, delayed, or cancelled. For a line, pass line_id: it reports how many vehicles are currently active and their delays.

  Parameters:

  • line_id — string — Line ID (e.g. 'ATB:Line:2_3', from get_departures) for a line-level summary
  • stop_place_id — string — Stop Place ID for a stop-level summary

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• get_stop_accessibility

  Get accessibility information for a stop place (Entur): per-quay (platform) wheelchair access, and a summary. Note: Entur's free API exposes wheelchair access per quay; deeper equipment detail (elevators, tactile guidance) is only in Entur's authenticated Stop Register API and is not available here.

  Parameters:

  • stop_place_id (required) — string — Entur Stop Place ID, e.g. 'NSR:StopPlace:59872'. Get one from resolve_stop_place.

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• list_quays

  List all quays (platforms/stopping points) at a stop place (Entur), with their public codes, coordinates, and wheelchair access.

  Parameters:

  • stop_place_id (required) — string — Entur Stop Place ID, e.g. 'NSR:StopPlace:59872'. Get one from resolve_stop_place.

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• get_fare_zones

  Get the fare (tariff) zone(s) a stop place belongs to (Entur). Fare zones set the ticket price for a journey.

  Parameters:

  • stop_place_id (required) — string — Entur Stop Place ID, e.g. 'NSR:StopPlace:59872'. Get one from resolve_stop_place.

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• find_shared_vehicles

  Find free-floating shared vehicles (city bikes, e-scooters, car share, mopeds) near a coordinate across all Norwegian operators (Entur Mobility). Each result shows the operator, type, battery, and location.

  Parameters:

  • latitude (required) — number — Latitude in decimal degrees (WGS84)
  • longitude (required) — number — Longitude in decimal degrees (WGS84)
  • count — integer — Maximum number of vehicles to return
  • range_m — integer — Search radius in metres
  • form_factors — array — Filter by type. Common values: BICYCLE, SCOOTER, CAR, MOPED, CARGO_BICYCLE, OTHER.

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• find_docking_stations

  Find shared-mobility docking stations (e.g. city bike stations) near a coordinate (Entur Mobility), with available vehicle and free-dock counts per station.

  Parameters:

  • latitude (required) — number — Latitude in decimal degrees (WGS84)
  • longitude (required) — number — Longitude in decimal degrees (WGS84)
  • count — integer — Maximum number of stations to return
  • range_m — integer — Search radius in metres

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

• get_vehicle_positions

  Get live positions of public transport vehicles (Entur realtime), filtered by operator codespace and/or line. Each vehicle shows its position, bearing, speed, and delay. Codespace examples: ATB (Trondheim), KOL (Stavanger), SKY (Bergen area). Get a line_id from get_departures.

  Parameters:

  • line_id — string — Line ID, e.g. 'ATB:Line:2_3'. Optional if codespace_id is given.
  • max_results — integer — Maximum number of vehicles to return
  • codespace_id — string — Operator codespace, e.g. 'ATB'. Optional if line_id is given.

  Hints: read-only not declared · destructive not declared · idempotent not declared · open-world not declared

Repository

Measured by MCPYP probing. Untested fields are omitted, never estimated. Listing is always free; MCPYP never proxies calls or stores user tokens.